Streetdog Motorcycle.

Part 1: Black, Streetdog electric motorcycle with chromoly frame. The body of the bike has been finished with a customised abstract geometric artwork titled ‘Te Wai Ōrea’ by Janine Williams. The front of the bike is fitted with a set of handlebars with a textured grip. Below each handlebar, a hand brake lever has been attached. Next to each, there is a metal box with “WARNING CLEAN FILLER / CAP BEFORE REMOVING / USE ONLY DOT3 OR DOT4 BRAKE / FLUID FROM SEALED CONTAINER” engraved on the top. On the outer end of each of the handlebars, there is and indicator light with “motogadget” printed around the edge in white. Attached between the handlebar grip and the indicator light, there is a protruding arm which support a circular mirror. On the proper left handlebar, next to the grip, there is a black box with a high beam button, and indicator switch, and a horn button. Illustrations referring to the function of the controls are printed above in white. To the right of this, there is a circular glass screen attached between the handle bars. “Streetdog” is printed in white on the cross bar between the handlebars. To the right of the screen, there is an oval shaped box with a tank and seat unlock button with “OPEN” printed next to it and a power button. Below this, there is an eco/boost button with a snail printed next to it. The proper right handlebar functions as a throttle.

The handlebars are attached to a forked hydraulic system which extends down and connects with the front wheel. A large circular headlight is attached at the top of the forks, between the handle bars. Text embossed on the outer clear casing reads “TOP / 12V 21.5W/15W/1.9W / E6 / 10 / A 02 WCR-DS 01 PL 0848 JUTE ALO 16 M-D E6 0848 SAE HL 17 DOT M P”. Below this, there is a black plastic fender fixed over the wheel which is connected on an axel fixed between the two hydraulic forks. A brake calliper with a coiled white line printed on it is fixed on the proper right side of the fork near the axel. There is a rotor, break line and break disk attached here as well. Spokes radiate from the centre to the black rim of the wheel onto which “1.85x18” has been engraved. A rubber tire onto which “NYLON RIM: 1.85 ROTATION / 48P / 6PR / LOAD RANGE C TUBE TYPE / MAX. LOAD 180 kg (395 lbs) AT 280 kPa (40 psi) COLD / JOURNEY REINFORCED / WD 2.75-18 P918-06” has been fitted. A metal valve with rubber cap protrudes from the rim. The tyre is wide and has a deep tread.

The body of the motorcycle has a large storage tank at the front which opens on a hinge towards the back of the motorcycle. The top of the storage tank and the lower section of the body has been finished with Janine William’s ‘Te Wai Ōrea’. A matte black panel runs through the centre of the body. Behind the storage tank, at the back of the bike, there is a leather seat which hinges open towards the back of the bike. Beneath the seat, there is a cavity for the motorcycle’s battery within the frame. An orange cable extends into this space to connect with the battery. Beneath this cavity, on the proper right side, there is a metal plate with “EARLY ADOPTER 045/100 / MADE IN WELLINGTON” engraved on it. On the proper left side, there is a metal keyhole with “014272” engraved. Below this, on each side, there is a foot peg for the rider. On the lefthand side of the bike, a retractable stand to support the motorcycle in an upright position is fixed to the body.

The rear wheel of the motorcycle is connected to the body between two shock absorbers and fixed on an axel. A black plastic fender is attached over the upper back of the wheel. At the back of it, there is a red reflector attached to the fender below a black number plate with “Streetdog / FTM / MOTION” embossed on it in silver. A brake calliper with a coiled white line printed on it is fixed on the proper right side near the axel. There is a rotor, break line and break disk attached here as well. Spokes radiate from the centre to the black rim of the wheel onto which “1.85x18” has been engraved. A rubber tire onto which “WD 90/90-18 / 57P / 6PR / LOAD RANGE 0 TUBE TYPE / MAX. LOAD 230 kg (507lbs) AT 280 kPA (40psi) COLD / JOURNEY / RIM: 2.15 / REINFORCED / […]” has been fitted. A metal bar extends around the front of the tire, a passenger foot peg on either side of the bike. in the centre of the wheel, on the left hand side ”[text] / SIA72V3000WN30701 0610037” is printed in white.

Part 2: Metal key for Streetdog motorcycle. The head of the key is covered with a black plastic casing with “COLO” embossed on one side. On the other side of the key, there is a window cut into the casing and “014272” has been engraved into the metal. The key is attached to a brass ‘D’ ring by a circular metal ring. On the ‘D’ ring, there is a leather tag with a spiral design engraved in it which contains an electronic key for the motorcycle.

Part 3: Metal key for Streetdog motorcycle. The head of the key is covered with a black plastic casing with “COLO” embossed on one side. On the other side of the key, there is a window cut into the casing and “014272” has been engraved into the metal. The key is attached to a brass ‘D’ ring by a circular metal ring. On the ‘D’ ring, there is a leather tag with a spiral design engraved in it which contains an electronic key for the motorcycle.

Part 4: Battery cell for Streetdog encased in a black metal unit. Casing has a flat base with sides that taper outwards to form a three-dimensional trapezoid shape. At the top of the casing, there is a leather handle through the centre. At one end of the handle, there is a raised power connector with orange cover next to a bolt with “Voir” engraved on it. At the other end of the handle, “FTN / MOTION” is embossed and painted silver. On the angled side of the battery casing, a label with “Li-ION Battery Pack / Product Model: DFN-01 / Normal Voltage: 72V / Limited Charging Voltage: 84V / Nominal Capacity: 40Ah / Stored Energy: 2880Wh / FTN / MOTION / WARNING: / […]” printed on it in white.

Part 5: Empty black metal casing for Streetdog battery. Casing has a flat base with sides that taper outwards to form a three-dimensional trapezoid shape. At the top of the casing, there is a leather handle through the centre. At one end of the handle, there is a raised power connector with orange cover next to a bolt with “Voir” engraved on it. At the other end of the handle, “FTN / MOTION” is embossed and painted silver.

Part 6: Black metal battery charging unit for Streetdog motorcycle. The unit is rectangular in shape and has ventilation holes cut into each of the short ends. On the base of the unit, “FTN / MOTION / Lithium Battery Charger / Model: SPC-600wwf-840070 / Input: 200-240V ~50-60Hz 7A / Output: 84.0V 7A / Manufacturer. Hui Zhou Superpower (Shenzhen) Technology Co., Ltd. / DANGER / Danger, high voltage inside / Risk of electric shock / For indoor use only / Use in dry location only / Refer to instruction manual / before charging / LED Status Indicator. / Standby: Green LED flashing / Charging: Red LED On / Full: Green LED On / Reverse Polarity: Red and Green LED flash / alternately / Battery Error: Red LED flashes four times / Green LED flashes once” is embossed in silver. At one end, there is a port with three metal prongs to connect to a mains power adaptor. At the other end, an orange cable with plug for the battery extends from the charging unit. Text is written along the length of the cable reading “C 90 AWM […]”.

Part 7: Black power cable for battery charging unit. Cable has a three-pronged NZ mains power adaptor plug at one end and connection for the battery charging unit at the other end with “CX-25 / CHUANGXU / SAA172077EA / 10A 250V” embossed. “SAA-171098-EA / CHUANG XU / CX-28 / 7.5/10A 250V~” is embossed around the prongs.